Keep the plant network healthy, and always have a good backup
The plant-floor side of industrial IT, in plain English. We clean up control networks, find the problems before they stop a line, and make sure there's a known-good copy of every PLC, HMI and SCADA project when something dies. Onsite in California's Central Valley, remote support nationwide.
Why it matters
The line goes down. The PLC is faulted or the HMI shows comms errors. After hours of chasing it, the cause turns out to be a bad cable, a duplicate IP, or a cheap switch someone added years ago. Then the next question: where's the latest program? Too often it's on a laptop that left with a contractor, or nobody is sure which copy is the real one. Most of this is preventable with a clean network, good drawings, and backups you can trust.
Industrial Ethernet design & cleanup
A control network your maintenance team can understand and support.
- EtherNet/IP and Modbus TCP networks for PLCs, drives, I/O and HMIs
- Managed switches in place of unmanaged ones where it counts
- Basic separation between the office network and the plant floor (VLANs and segmentation)
- A simple IP address plan, so new devices don't collide with old ones
- Up-to-date network drawings, device lists and labeled cables
Network health checks & audits
We walk the network and tell you what we find, in plain words.
- Duplicate or conflicting IP addresses
- Unmanaged switches hiding in panels
- Flaky cables, connectors and ports
- Devices that drop offline or throw intermittent comms faults
- A short written list of fixes, worst problems first
PLC, HMI & SCADA backups and version control
Know which copy is the good one, and where it lives.
- Scheduled backups of Studio 5000 Logix projects
- Ignition gateway backups on a schedule
- HMI project backups
- A known-good copy stored off the machine
- Change tracking, so you can see what changed, when, and why
Disaster recovery plan
When a PLC or SCADA server dies, your team shouldn't be guessing.
- A step-by-step restore plan for each critical PLC, HMI and SCADA server
- Where the backups are, what spares you need, and who to call
- A practice restore, so you know the plan works and how long it takes
Remote access done right
Remote support that's useful without leaving the door wide open.
- A simple, secure way for support to connect, in place of always-on remote-desktop tools
- Access only when you allow it, with individual logins
- Basic security hardening on HMI and SCADA PCs as good practice: updates, removing unused software, sensible user accounts
How we work
- Look first. We start with a walk-through and a review of what you have.
- Plain talk. You get a short list of findings and costs before any work starts.
- Around production. Changes are planned for downtime windows.
- Leave it documented. Drawings, IP lists and backup locations your team keeps.
Not sure where your network and backups stand?
Book a free Controls Health Check: onsite in California's Central Valley, or a free remote review anywhere else in the U.S. Or grab the free checklist and start on your own.